New Dozer Is home, did some work and have a couple questions

Post support questions about your JD350 and newer crawler here
Post Reply
User avatar
JimmyFunk
40C crawler
40C crawler
Posts: 24
Joined: Mon Oct 29, 2012 10:09 am
Location: Carrollton, Ohio

New Dozer Is home, did some work and have a couple questions

Post by JimmyFunk » Sun Mar 09, 2014 6:06 pm

Hi all got my new 350 dozer home. had no issues hauling it and the truck handled it good. The dozer just had the pump rebuilt and the one injector line started spraying today while running it. I am assuming it didn't seal right or needs tightened up. I am assuming this is the same as a 4020 that has the little rings to seal it. It has been a while since I have messed with pumps if I unbolt the line from the pump and put the orings back in it will that line need bleed off from the injector?

When I got the dozer home I pushed some trees out of our field. I used the six way to clean out a ditch. I wish it wasn't so muddy here so I could do more...

Image

Image

Image

Image

Image

The top line on this side is is the one that is spraying...
Image
Im Addicted to John Deere's
1957 JD 420c 4 roller w/ reverser
196? JD Straight 350 Diesel 6 way blade
1945 JD B
1940 JD H
1951 JD GW
1955 JD 70D
1957 JD 720D
1959 JD 730D
Top
User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Sun Mar 09, 2014 7:09 pm

make sure that both banjo washers are on the line and just break it lose work it back and froth a few times and crank it down tight should stop it from leaking if not get new banjo washers and replace just MAKE SURE you don't lose one when putting it back together gets VERY expensive don't ask why I know :oops: but it does
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Top
jthornton
440 crawler
440 crawler
Posts: 165
Joined: Thu Jan 23, 2014 5:33 am
Location: Poplar Bluff MO
Contact:
Contact jthornton

Post by jthornton » Mon Mar 10, 2014 4:56 am

Yours looks to be a lot more original than mine. Can you get a photo of the dash area for me?

JT
Top
User avatar
JimmyFunk
40C crawler
40C crawler
Posts: 24
Joined: Mon Oct 29, 2012 10:09 am
Location: Carrollton, Ohio

Post by JimmyFunk » Mon Mar 10, 2014 6:35 pm

I will take a pic of the dash for ya tomorrow....
Im Addicted to John Deere's
1957 JD 420c 4 roller w/ reverser
196? JD Straight 350 Diesel 6 way blade
1945 JD B
1940 JD H
1951 JD GW
1955 JD 70D
1957 JD 720D
1959 JD 730D
Top
JWB Contracting
2010 crawler
2010 crawler
Posts: 597
Joined: Thu Aug 27, 2009 10:08 pm
Location: Edmonton, Alberta

Nice original 350

Post by JWB Contracting » Mon Mar 10, 2014 8:32 pm

Just love seeing these old 350's in service. Remember to keep those tracks shovelled.
Jason Benesch

John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
Top
User avatar
JimmyFunk
40C crawler
40C crawler
Posts: 24
Joined: Mon Oct 29, 2012 10:09 am
Location: Carrollton, Ohio

Post by JimmyFunk » Tue Mar 11, 2014 7:21 pm

JT here you go...Image

Image

Image
Im Addicted to John Deere's
1957 JD 420c 4 roller w/ reverser
196? JD Straight 350 Diesel 6 way blade
1945 JD B
1940 JD H
1951 JD GW
1955 JD 70D
1957 JD 720D
1959 JD 730D
Top
jthornton
440 crawler
440 crawler
Posts: 165
Joined: Thu Jan 23, 2014 5:33 am
Location: Poplar Bluff MO
Contact:
Contact jthornton

Post by jthornton » Wed Mar 12, 2014 8:54 am

Thanks for the photos, what does the toggle switch do?

My dash is slightly different with the gauges all lined up in a row.

At least I know what shape to make the reversing knob now.

Thanks
JT
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 15 guests