Parts wanted
-
- MC crawler
- Posts: 5
- Joined: Wed Jan 23, 2013 3:58 pm
Parts wanted
Hello Lavoy
Wondering if anyone has some brackets for the 40 undercarriage. The part number on it is M3300T and it is a bracket that holds the cross member of the crawler onto the track assembly. There are four on each side. I need two. You can email me at tmjanz@mymts.net or reply here. Thanks Our crawler is and MC with a four roller 40 undercarriage. It has seen better days. The upside is that it has a loader. Will post pictures later.
Wondering if anyone has some brackets for the 40 undercarriage. The part number on it is M3300T and it is a bracket that holds the cross member of the crawler onto the track assembly. There are four on each side. I need two. You can email me at tmjanz@mymts.net or reply here. Thanks Our crawler is and MC with a four roller 40 undercarriage. It has seen better days. The upside is that it has a loader. Will post pictures later.
Can't find that part number in my manual?
lavoy
lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- MC crawler
- Posts: 5
- Joined: Wed Jan 23, 2013 3:58 pm
M3300T clamps off of a 420/430
Thanks for the heads up. We need two M 3300T clamps. We have 6 but need two more. Please let me know.
- lurch85
- 430 crawler
- Posts: 95
- Joined: Fri Feb 01, 2013 6:11 pm
- Location: Upper Peninsula of Michigan
40 clamps
I believe I have at least 2 of the clamps that you need. Havent seen a post since the 5th there, and if Lavoy hasn't got it for you, contact me and I can get you one. I'll let Lavoy set the price if he's comfortable and you agree. (i'll post a pic first)
John Deere 420C, John Deere 350 straight with Gafner loader, John Deere 4020
The clamps listed are for a 420 undercarriage, 40 is different, so something is up.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- MC crawler
- Posts: 5
- Joined: Wed Jan 23, 2013 3:58 pm
I do not have a parts book for the 40 or 420. The undercarriage is NOT original. The brackets that hold the front idler and track tensioning pieces were similar to ones we found in the local JD parts book of the 40. Whether they are newer than that I do not know. We do need 2 M3300T brackets because I have six and would like some pieces to match. Lavoy, do you have any? If not do you have any idea of a value of them? Thanks.
I should have, shoot me an e-mail and I will get back to you.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 18 guests