350 engine in 1010
-
- 1010 crawler
- Posts: 259
- Joined: Wed Sep 11, 2013 3:34 pm
- Location: Shiner, texas
350 engine in 1010
My nephew had a valve head snap off and total the engine in his 1010C gas. He has access to an engine from a 350 and wonders if it will bolt up. Anyone have experience with this?
Early 40C w/Yakima toolbar and homebuilt ripper: 350 w/6-way
The short answer is no, I don't believe it will not bolt up to the bellhousing for the 1010 without a lot of custom modifications and then still may not be possible.
If you want a more detailed explanation there are a couple of threads discussing engine mods on 1010s/2010s but essentially they are somewhat orphaned in terms of parts compatibility with other models except for undercarriage. However there are power units and combines that have compatible engines, and you can swap a 2010 engine into a 1010:
http://www.jdcrawlers.com/messageboard/ ... light=1010
http://www.jdcrawlers.com/messageboard/ ... light=1010
http://www.jdcrawlers.com/messageboard/ ... t=1010+350
If you want a more detailed explanation there are a couple of threads discussing engine mods on 1010s/2010s but essentially they are somewhat orphaned in terms of parts compatibility with other models except for undercarriage. However there are power units and combines that have compatible engines, and you can swap a 2010 engine into a 1010:
http://www.jdcrawlers.com/messageboard/ ... light=1010
http://www.jdcrawlers.com/messageboard/ ... light=1010
http://www.jdcrawlers.com/messageboard/ ... t=1010+350
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
I had a little time today so found a couple more related threads you can go through on this subject:
http://www.jdcrawlers.com/messageboard/ ... ellhousing
http://www.jdcrawlers.com/messageboard/ ... ellhousing
http://www.jdcrawlers.com/messageboard/ ... ellhousing
http://www.jdcrawlers.com/messageboard/ ... ellhousing
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
-
- 1010 crawler
- Posts: 259
- Joined: Wed Sep 11, 2013 3:34 pm
- Location: Shiner, texas
Remember if he really overpowers the crawler then he is more likely to wear out the remaining drivetrain components (reverser, transmission, and finals) a lot faster and they are not cheap or easy to find either.
Here is an interesting thread about repowers if that is really what he wants to do:
http://www.jdcrawlers.com/messageboard/ ... craigslist
Here is an interesting thread about repowers if that is really what he wants to do:
http://www.jdcrawlers.com/messageboard/ ... craigslist
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
Who is online
Users browsing this forum: No registered users and 29 guests