Anyone know the procedure for measuring from pin to pin to gauge track wear? Oh, and the measurement inself.
Terry
1010 track qeustion
-
- 440 crawler
- Posts: 236
- Joined: Thu Dec 27, 2007 9:01 pm
- Location: Pa.
- DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
23" center to center across 3 links is like new.
23 1/2" is shot.
Duke
23 1/2" is shot.
Duke
Last edited by DukeofDeere on Sat Mar 29, 2014 7:43 pm, edited 1 time in total.
Across 5 pins, or 4 links, however you want to say it. New pitch is 5.75", multiply by 4 links is 23".
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Re: 1010 track qeustion
Terry I have a undercarriage wear gauge that I reproduced for a 1010. Check out the posting. http://www.jdcrawlers.com/messageboard/ ... highlight=townlineterry wrote:Anyone know the procedure for measuring from pin to pin to gauge track wear? Oh, and the measurement inself.
Terry
1956 JD420, gearmatic 8a winch, custom 6 way blade and FOPS.
Who is online
Users browsing this forum: No registered users and 22 guests