Hi,
Joystick would be for a PAT. A PAT is usually seen on industrial machines. Manual A/T blades are more common on an Ag machine.
A manual blade just has lift, so one lever for that. The 3 pt would be another lever. A remote would be a third. So a 3 lever arrangement makes sense to me.
Stan
Waiting for the call
- Stan Disbrow
- 350 crawler
- Posts: 2904
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
It's a full hyd 6 way blade and there are 4 levers on the right fender... damn I wish I'd of thought to bring a camera yesterday!!
In the photos I've seen, I do not see 2 levers on the left side of the dash. I know one is PTO and I'm thinking the other is either the rear hyd or 3 pt. Or, one of the levers on the fender is the rear outlets/3 pt.???
It has the normal 4 spd shift and throttle on the right side of the dash.
In the photos I've seen, I do not see 2 levers on the left side of the dash. I know one is PTO and I'm thinking the other is either the rear hyd or 3 pt. Or, one of the levers on the fender is the rear outlets/3 pt.???
It has the normal 4 spd shift and throttle on the right side of the dash.
- Stan Disbrow
- 350 crawler
- Posts: 2904
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Hi,
IIRC, if that was an Ag crawler with 3pt and no blade, then the 3pt hyd control is on the dash.
Stan
IIRC, if that was an Ag crawler with 3pt and no blade, then the 3pt hyd control is on the dash.
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Who is online
Users browsing this forum: Google [Bot] and 34 guests