Clutch parts
Clutch parts
Lavoy:
I have a 450 crawler loader. Serial # 5E3M012289. I am going to do the clutches and brakes this winter. The parts I know I am going to need are the 14 steels, the 16 friction disks, and the 2 throw out bearings. The 2 pressure plates will be a decision made after I get it torn down. I will rebuild my brake bands myself since I got the procedure and parts list here on this site. Are the springs for the clutch pressure plate available if they are needed verses a rebuilt or new assembly?
I want to thank you for the great site that you run here as it has been very helpful to me and others. If you can give me price and availability on these parts so that I can know exactly how much I need to save up between now and the rebuild I would appreciate it. If you prefer to conduct our business in some other way than on this site please advise me of that procedure.
Thanks
Steve
I have a 450 crawler loader. Serial # 5E3M012289. I am going to do the clutches and brakes this winter. The parts I know I am going to need are the 14 steels, the 16 friction disks, and the 2 throw out bearings. The 2 pressure plates will be a decision made after I get it torn down. I will rebuild my brake bands myself since I got the procedure and parts list here on this site. Are the springs for the clutch pressure plate available if they are needed verses a rebuilt or new assembly?
I want to thank you for the great site that you run here as it has been very helpful to me and others. If you can give me price and availability on these parts so that I can know exactly how much I need to save up between now and the rebuild I would appreciate it. If you prefer to conduct our business in some other way than on this site please advise me of that procedure.
Thanks
Steve
No pressure plate parts are available, sorry. Let me know when you get to that point, I will check on new and rebuilt.
Fibers and steels are no problem.
Lavoy
Fibers and steels are no problem.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
brake band rebuild
could you forward the post author or the post itself , i did search it and could not locate thanks
kt
ktheaker
There are pictures so this may take time to load. It is by RedDirt.
http://www.jdcrawlers.com/messageboard/ ... 7&start=15
There are pictures so this may take time to load. It is by RedDirt.
http://www.jdcrawlers.com/messageboard/ ... 7&start=15
Any day you wake up breathing is a good day and the only easy day is yesterday.
No, I only have new and some relined brakes.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Parts
Lavoy
I am finally ready for parts. I need 14 steels, 16 fiber disks, and 2 throwout bearings. My pressure plates are OK and meet specs so I will reuse them.
I am finally ready for parts. I need 14 steels, 16 fiber disks, and 2 throwout bearings. My pressure plates are OK and meet specs so I will reuse them.
Any day you wake up breathing is a good day and the only easy day is yesterday.
Send me an e-mail at postmaster@jdcrawlers.com with name and address, and I will get an order written up.
Thanks,
Lavoy
Thanks,
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 74 guests