350C isolator CONVERSION - "C" to "D"
-
- 440 crawler
- Posts: 149
- Joined: Tue Sep 02, 2014 4:30 pm
- Location: new york..upstate..
Last edited by cantbeatadeere on Sun Dec 28, 2014 5:46 pm, edited 1 time in total.
-
- 440 crawler
- Posts: 149
- Joined: Tue Sep 02, 2014 4:30 pm
- Location: new york..upstate..
https://scontent-a-lga.xx.fbcdn.net/hph ... 3227_o.jpg
----put the tape there for scale(not that it was really needed)
----put the tape there for scale(not that it was really needed)
Last edited by cantbeatadeere on Sun Dec 28, 2014 3:42 pm, edited 1 time in total.
-
- 440 crawler
- Posts: 149
- Joined: Tue Sep 02, 2014 4:30 pm
- Location: new york..upstate..
-
- 440 crawler
- Posts: 149
- Joined: Tue Sep 02, 2014 4:30 pm
- Location: new york..upstate..
https://fbcdn-sphotos-f-a.akamaihd.net/ ... 2702_o.jpg
---soon as my hub is ready --IN goes the engine!!
---soon as my hub is ready --IN goes the engine!!
- Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
-
- 440 crawler
- Posts: 149
- Joined: Tue Sep 02, 2014 4:30 pm
- Location: new york..upstate..
350 isolator
Hey I hope you show a picture with the splines in the isolator before you put it together,,, PLease.please.. and do you have a flywheel number#, as I think I might have one of those flywheels,, just curious,, thanks,, Mark.
P.S. your dozer looks nice and straight,,good looking Machine.. You'll have to give her a female name for various reasons. Ha. Mark.
P.S. your dozer looks nice and straight,,good looking Machine.. You'll have to give her a female name for various reasons. Ha. Mark.
350 loader,350c dozer winch and arch,450c winch and arch,450e winch and arch,D37p komatsu lgp dozer,D85 Komatsu dozer,D8k Caterpillar.
-
- 440 crawler
- Posts: 149
- Joined: Tue Sep 02, 2014 4:30 pm
- Location: new york..upstate..
-
- 440 crawler
- Posts: 149
- Joined: Tue Sep 02, 2014 4:30 pm
- Location: new york..upstate..
Here is the splined hub slid on the forward splined shaft of the reverser, little trial fit!!
https://www.facebook.com/photo.php?fbid ... 251&type=3
https://www.facebook.com/photo.php?fbid ... 251&type=3
Last edited by cantbeatadeere on Thu Feb 25, 2016 7:23 pm, edited 4 times in total.
-
- 440 crawler
- Posts: 149
- Joined: Tue Sep 02, 2014 4:30 pm
- Location: new york..upstate..
the assembly mocked up and pre fit/hand assembled.
https://www.facebook.com/photo.php?fbid ... 101&type=3
https://www.facebook.com/photo.php?fbid ... 101&type=3
https://www.facebook.com/photo.php?fbid ... 101&type=3
https://www.facebook.com/photo.php?fbid ... 101&type=3
Last edited by cantbeatadeere on Thu Feb 25, 2016 7:31 pm, edited 1 time in total.
-
- 440 crawler
- Posts: 149
- Joined: Tue Sep 02, 2014 4:30 pm
- Location: new york..upstate..
Last edited by cantbeatadeere on Thu Feb 25, 2016 7:33 pm, edited 2 times in total.
-
- 440 crawler
- Posts: 149
- Joined: Tue Sep 02, 2014 4:30 pm
- Location: new york..upstate..
O.K here is where I am at. all parts are done with the exception of the hardening process yet to be completed on the splined hub, this will be done for free as the machine shop is going to slip it in with a large order going to the hardener....so as soon as he gets the order back I will be finishing this project and possibly post a video of my QUIET running 350!!!
main parts - FLYWHEEL # RE15923, ISOLATOR # AT77320, HUB # T78098
main parts - FLYWHEEL # RE15923, ISOLATOR # AT77320, HUB # T78098
Great pics, this shows what the conversion looks like for those considering it.
I had two hubs shipped out this week for broach and heat treat, so I will have enough parts for two conversions in a few weeks. Will be sending a larger batch of hubs out in the not too distant future, so should have more available by Spring sometime.
Lavoy
I had two hubs shipped out this week for broach and heat treat, so I will have enough parts for two conversions in a few weeks. Will be sending a larger batch of hubs out in the not too distant future, so should have more available by Spring sometime.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Very interesting, I can see why the spring thing would be a long term issue.
Lavoy, you replicating all of the parts needed to do this, or are you getting some from deere and some you are making? Are these the parts that JD was offering for an upgrade as jdmarris suggested on the yt site?
Lavoy, you replicating all of the parts needed to do this, or are you getting some from deere and some you are making? Are these the parts that JD was offering for an upgrade as jdmarris suggested on the yt site?
450C Track Loader
291457T
291457T
Nothing is available from Deere, hasn't been for years.
The flywheels I have or will have are NOS Deere. The hub is obviously being machined, and the isolator in the pic is one of mine.
The kit that Deere supplied is in virtually all aspects identical the one I will have.
Lavoy
The flywheels I have or will have are NOS Deere. The hub is obviously being machined, and the isolator in the pic is one of mine.
The kit that Deere supplied is in virtually all aspects identical the one I will have.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 19 guests