440 crawler
-
- MC crawler
- Posts: 2
- Joined: Mon Jun 01, 2015 1:43 pm
440 crawler
Was wondering if anyone knew if 450 tracks and sprockets would fit a 440. I'm looking for tracks and sprockets for mine and found a set of nice ones off a 450 dirt cheap
- Stan Disbrow
- 350 crawler
- Posts: 2904
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Hi,
While the model numbers seem close, the sizes of the two machines are not. The 350 is closer to the 440 in size, just a bit larger. You can use 350 chains, but have to cut the teeth off the 440 sprockets and weld on a 350 rim sprocket as the pitch is different.
Stan
While the model numbers seem close, the sizes of the two machines are not. The 350 is closer to the 440 in size, just a bit larger. You can use 350 chains, but have to cut the teeth off the 440 sprockets and weld on a 350 rim sprocket as the pitch is different.
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
-
- MC crawler
- Posts: 2
- Joined: Mon Jun 01, 2015 1:43 pm
440 tracks
Your lucky day, I have a set of 350 tracks [chains and loader pads]. They are in very good shape. And 10 bottom rollers, 5 JD's and 5 berco in good shape. I took these track off of a 420 loader intending to put them on a 440 dozer that I had, sold my dozer and tried to talk the buyer into taking the tracks but he didn't want them. Anyway I'll sell them cheap. I'm located in west central IN. Let me know if you are interested. I need them gone.
dthomson01@frontier.com
dthomson01@frontier.com
Re: 440 tracks
Thanks Dave, considered them sold!Dave T wrote:Your lucky day, I have a set of 350 tracks [chains and loader pads]. They are in very good shape. And 10 bottom rollers, 5 JD's and 5 berco in good shape. I took these track off of a 420 loader intending to put them on a 440 dozer that I had, sold my dozer and tried to talk the buyer into taking the tracks but he didn't want them. Anyway I'll sell them cheap. I'm located in west central IN. Let me know if you are interested. I need them gone.
dthomson01@frontier.com
1956 JD420, gearmatic 8a winch, custom 6 way blade and FOPS.
- DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
Who is online
Users browsing this forum: No registered users and 66 guests