450b dozer steering clutches

Post support questions about your JD350 and newer crawler here
Post Reply
Jimmy450b
MC crawler
MC crawler
Posts: 7
Joined: Sun Jun 03, 2012 10:10 pm

450b dozer steering clutches

Post by Jimmy450b » Tue Nov 10, 2015 6:05 pm

I'm installing new steering clutches in my 450b. I had to buy 2 new drums and new metal and metallic discs. When I installed the new discs they stick up above the drum but level with the hub. Is this normal? The count is right, 9 metallic and 8 steel. I checked the thickness, the steel are 10mm and the metallics are 20mm. ? [/img] Tried to load a picture.[/img]https://www.facebook.com/media/set/?set ... b520f9dcc2
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11108
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Tue Nov 10, 2015 7:57 pm

Your measurements seem off, what is thickness in SAE decimal?
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
Jimmy450b
MC crawler
MC crawler
Posts: 7
Joined: Sun Jun 03, 2012 10:10 pm

Post by Jimmy450b » Tue Nov 10, 2015 10:11 pm

Lavoy wrote:Your measurements seem off, what is thickness in SAE decimal?
Lavoy
The steel discs are .097
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11108
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Tue Nov 10, 2015 11:20 pm

New spec is .105, so that is not the issue. Bolt the pressure plate on and see if the fingers adjust.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 15 guests