Worn out track chain for my '49 MC

skinchin · Post by **skinchin** » Sun Jun 05, 2016 12:35 pm

I'm looking for some advice on rebuilding/replacing the track chains on the crawler. The adjusters are right at their maximum extension so I need to something before I do real work with the machine.

I've been scouring the usual "old tractor" sources for rebuilt/less worn chains without much luck. Any one know where I might get pins and bushings pressed out/in in the northwest (Oregon/Washington/Idaho)?

Thanks in advance.

Pat · Post by **Pat** » Mon Jun 06, 2016 6:59 am

You might check with Ted Adams at Lindeman Archives for a recommendation. He is in Yakima Washington. his e-mail is in his website www.lindemanarchives.com

Stan Disbrow · Post by **Stan Disbrow** » Mon Jun 06, 2016 7:32 am

Hi,

AFAIK, those pins and bushings are no longer available.

Stan

Post by **Lavoy** » Mon Jun 06, 2016 8:25 am

Pins and bushings are available, but currently at low stock. Usually they restock within a month or two.
Lavoy

JDcrawlers Messageboard

Worn out track chain for my '49 MC

Worn out track chain for my '49 MC

Who is online