Will an inside blade from a 1010 fit any other models?
Thanks
blade swap
-
gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
blade swap
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
440 kind of.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
fitting it to a 440, it(the yoke) would have to be cut and widened by at least 3/4" , the nose of a 440 is wider than a 1010. the outside dimension will tighten up too,, you will only have about 3/4" on the outside, between track and dozer yoke,,, may depend on what width track you have. narrow pads will help especially if your sprockets are deepdished.
also, the length of the yoke is about a foot longer, so you could shorten it or you'll have the blade way out there controlling the dozer.
how do i know? i was contemplating the same thing last year.
also, the length of the yoke is about a foot longer, so you could shorten it or you'll have the blade way out there controlling the dozer.
how do i know? i was contemplating the same thing last year.
440icd/602/8a,,440icd/831/ripper,,440icd/831/3pt.,misc. 440 parts, i have 5 of these now, but i can stop anytime 
-
gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
Thanks for the replies. I'm selling my blade and didn't want to misinform anyone one on what it might fit.
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
Who is online
Users browsing this forum: No registered users and 256 guests