350 B final drive
350 B final drive
Just replaced bearings and cups on upper shaft. How do you check how much free play the shaft needs. I took out four shims, two large and two medium ones. I'm replacing with new ones. Thanks for any help.
Re: 350 B final drive
Add excess shims so there is freeplay. Measure freeplay with a dial indicator, remove adequate shims to get proper preload.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 15 guests