My dad and I have a 440IC that we purchased with a busted hydraulic pump, so we could move the machine but not the loader or backhoe. We have recently aquired a pump thanks to rustycrawler however we have put it in yet because of a few bumps in the road. First off the pump we had was Cessna and the we now have is a Hydreco(can provide serial nimbers if neccesary) are they compatible? Secondly the linkage between the two pumps is off by abouta 1/4 of an inch is this a problem? And finally the cause of the busted pump was traced to a pressure spike how can this be solved?
Thanks,
the crawler kid
JD440IC Hydraulic pump ?'s
-
- MC crawler
- Posts: 5
- Joined: Mon Aug 20, 2007 6:36 pm
- Location: Richmond, VA / Frederick, MD
JD440IC Hydraulic pump ?'s
440IC w/ 831 Loader and 51 Backhoe
Caterpillar D2 wide gauge w/ blade
Caterpillar 933 track loader
Farmall H
Caterpillar D2 wide gauge w/ blade
Caterpillar 933 track loader
Farmall H
-
- MC crawler
- Posts: 5
- Joined: Mon Aug 20, 2007 6:36 pm
- Location: Richmond, VA / Frederick, MD
hydro pump
Do ya'll know the model # of a new pump that will fit a 440?
Who is online
Users browsing this forum: No registered users and 9 guests