main bearing set for 40, 420, 430, 440

[gaspumpsam]

dtoots1-
bearing are quite forgiving, as long as crank is smooth, and your bearings arnt gouged etc, you have lots of good assembly grease, engine oil pump is good, ( so it gets oil ASAP on start up) and good oil, cross your fingers, and you should be ok.

[dtoots1]

gaspumpsam,

Still need bearings...believe you have .010's...advise ifyou still have....may get crank back up to that....tech guy cannot find my old bearings as yet...dang crap

Dennis